+91 7600013562 
V6 Submersible Pumpset
- Energy efficient motor
- Low operating cost
- Water lubricated motor with easily re-woundable stator
- Radial and mixed flow models(with special High-Head design)
- Pump sets with special materials are available on request
- Rubber diaphragm provided at the bottom of the motor to compensate thermal expansion of water
- Water extraction from bores of diameter 6" (150mm) and above
- Irrigation systems for Agriculture including Drip and Sprinkler systems.
- Pressure boosting applications
- Domestic water supply to large residences and multi storied apartments
- Water supply to commercial establishments like Hotels, Lodges and Hospitals
- Dewatering of mines
- Industrial water supply
| PARTICULARS | DETAILS |
|---|---|
| MOTOR | |
| Stator Shell | Stainless steel |
| Thrust Bearing | Teflon/Carbon with stainless steel segments |
| Bearing Brush | Leaded Tin Bronze/ Carbon |
| Diaphragm | Nitrile Rubber |
| Shaft | Stainless steel |
| Strainers | Stainless steel |
| PUMP | |
| Pump shaft | Stainless steel |
| Discharge casing | Cast Iron / Stainless steel |
| Shaft sleeve | Stainless steel |
| Bowl/Diffuser assembly | Cast Iron / Stainless steel |
| Bearing Bush | Leaded Tin Bronze/Carbon/Nitnie Rubber |
| Impeller | Stainless steel / Engineering plastic |
| PARTICULARS | DETAILS |
|---|---|
| Bore size min. | 6”(150mm) and above |
| Power Range | 3.0 to 30.0 HP |
| Voltage Range | 340V- 440V, AC Three phase , 50Hz |
| Speed | 2880RPM |
| Motor Type | Water filled and water cooled Induction motor |
| Coupling | Key / NEMA |
| Head | Maximum 398 M |
| Discharge | Maximum 1600 LPM |
| Liquid temperature | Maximum 35ºC |
| Sand content in water | 50 PPM |